Home

Network

How to change the discoverable name of your devices

Before you start

1) Make sure you have for each TV a remote control at your disposal 2) Make sure you have Document 2 | Names per showroom screen ready (see mail admin) 3) Make sure you have carefully red the instructions of your contact person 4) Make sure the TV's are switched on

When you have everything ready go to step 1

If the remote controls are not responding, make sure to point them directly at the apple-tv's and make sure the signal of the remote control is not blocked by any panels, doors or other objects.

Step 1

A) Take the control for the screen on the left and press the play/pause button (image 1). It will show you the following menu (image 2)

Image 1 | Press the play/pause button to open the menu

Image 2 | This the menu that opens when pressing play/pause button.

Step 2

Take the control and tap into the showroom name. The following screen will appear.

Image 3 | Type the name of the screen in the box (highlighted in this picture in green).

Step 3

Press done. You will now see the name of the showroom corrected in the Sales App.

Step 4

Repeat steps 1 till 3 for the Middle, Right and other screens if available.

Step 5

It is ready to test, please open your iPad Sales app and test the configuration.

PreviousTemplatesNextTroubleshooting Guide

Last updated

Was this helpful?